Wall Mounted Rainbow Trio Ensemble

Rainbow Trio Bongos

1. Attach bongos to wall mount with the M10x50 security screws, square washers and PU mounts. (1.1) (See Assembly Guide)
2. Position Bongos in desired location, according to correct Key stage height, this may require 2 persons.
3. Mark hole locations (X3) on Using mount plate as a guide, making sure instrument is level. Use Template supplied.
4. Drill hole locations (X3) according to your chosen fixings. (frame fixings, wall bolts or chemical anchors) depending of the structure of the wall.
5. Fix through Plate (X3) with suitable fixings (not supplied) in correct orientation and Key stage.

Instrument Components:
M10x50 Security Screw x6
M10x50x3 Square washer x6
PU 200 Mount x4
PU 250 Mount x2

Wall Fix Components: 2 Part Cover Cap x3
Wall Anchors not supplied.

Assembly Guide

Components List:
M 10x50 Pin torx X6
M10x50x3 square washer X6
HDPE MOUNT 200 X4
HDPE MOUNT 250 X2
2 Part Cover Cap X3

Tools: TX 45 Driver Bit
Wall Fixed Rainbow Trio Chimes
Installation Instructions

1. Position chimes in desired location, according to correct Key stage height, t his may require 2 persons.
2. Mark hole locations (X4} on backboard between 1st and 2nd notes at each end, making sure instrument is level.
3. Drill hole locations (X4} according to your chosen fixings (frame fixings, wall bolts or chemical anchors} depending on the structure of the wall.
4. Fix through Backboards {X4} with suitable fixings (not supplied} in correct orientation and Key stage 5. Beaters can be fixed to Backboards or directly to wall depending on customers preference.

Components:
Eye Straps x2
Pin Torx 25 Driver Bit x1
10x38mm Secure Screw x4
Pair Small/Large Beaters x1

Wall fixings are not supplied, installer will select suitable method of fixing.

Rainbow Trio Metallophone
Installation Instructions:

1. Attach the steel mount to the rear of t he instrument with the M8x20 screws and 2 part security caps. (1.1) (See Assembly Guide)
2.Position instrument in desired location, according to correct Key stage height, t his may require 2 persons.
3. Mark hole locations (X4) using the pre drilled holes in square plate. Use Template Supplied.
4. Drill hole locations (X4) according to your chosen fixings (frame fixings, wall bolts or chemical anchors) depending of the structure of the wall.
(Not Supplied)
5. Fix through Plate with suitable fixings (not supplied) in correct orientation and height for intended Key stage. Cover Fixings with 2 Part Caps supplied
6. Attach the 1 pair of beater to the saddle strap on t he leg. (1.3)

Instrument Components:
M8x20 Security Scrw x4
M6x20 Security Screw x2
2 Part Cover Cap x4
M6 Saddle Strap x1
Pair Small Red Beaters x1

Wall Fix Components:
2 Part Cover Cap x1

Wall Anchors not supplied.




Assembly Guide : Components List

2 Part Cover Cap X8
M8 Nyloc nut X4
Saddle Strap X1
M6x20 Pin torx X2
M8x20 Pin torx X4